• Skip to primary navigation
  • Skip to main content

Just Lugger Joinery

  • Home
  • Product Range
    • Joinery
    • Spars
    • Accessories
  • How to Do It
  • Help and Advice
  • Reviews
  • Blog
  • About Us
    • Materials
  • Ordering

Accessories

Lugger Oars

These used Lugger oars are free to a good home if anyone needs them. They are surplus to our needs in the Greek Ionian. Please note that these items are old, used and have not been reconditioned.
£0

Stern Kedge Anchor Set

Stern kedge anchor, chain and warp set with storage bag.

I particularly like having anchors on deck and available to deploy. So with this bag clipped to the port side aft deck, warp led back to the stern cleat very close by, it’s all set for use. The bag keeps the kedge anchor off the gel coat / paintwork and when not in use it’s all stored in the bag. I have a fair lead to the aft of the starboard side gunwale rail, so when the anchor is set the fair lead is used to keep the line static and from rubbing the gunwale rail.
Cost to follow

Brass Keel Protective Strips

These are of 15×5 mm convex sections. There are two per unit, one from the stem head to the eye and the longer section from the eye to the keel band. These pieces can be cut to your exact lengths. They are pre-drilled and countersunk with all fitting screws supplied.
£55.00 per set

Centre Plate Pivot Pin and Strengthen Plates

This first image is what you never want to see or even imagine. This was the remains of a short pivot pin that we dug out of a mass of poorly applied glass mat and resin. No bolt head or nuts, just held in with resin, hence the oversize and elongated holes.
This is a common manufacturing fault.

To upgrade this we have 5 mm stainless steel plates made that sit on the bottom keel casing and the 10 mm hole is drilled to locate the original position. The kit includes the 100 mm bolt to act as the new pivot pin.
£38.00

Graphics

We can produce graphics with your boat name / SSR number in any font and colours to your requirement. We can also supply pre-applied to a black acrylic plate with holes drilled and chamfered edges.
Price on application

Solid Rudder

Bin your rusting flip-up blade rudders and get back to a solid blade!

Our solid rudder is fully galvanised for a long life, with a hole in the blade for the split pin as a keep when in the withdrawn position.
£145.00

  • Go to page 1
  • Go to page 2
  • Go to Next Page »

Copyright © 2023 Dragon Design · Contact Details · Terms & Conditions
Dragon Design is an independent business and is not, in any way, connected with, licensed by or an authorised dealer of Drascombe Boats/Churchouse Boats Limited