Again to the Drascombe followers of Just Lugger Joinery&more along with its sister company Dragon Drascombe, Lugger sailing In the South Ionian sea, it’s spring time again and thoughts advance onto the sailing adventures that lie ahead. Now with the weather improving it’s time to get the boat cover off and to clean and prepare the boat.
As you will have noted, at JLJ this winter we have been kept busy with supplying boat owners with joinery and fittings for big maintenance projects and I have also hosted 2 Drascombe Owners Practical Workshop Courses based at the Workshops of my base company Dragon Design. Both 4-day courses were a great success as you will read on the website’s dedicated Practical Workshop page and I have just announced the dates of the next courses starting this coming November.



I’m sure as Drascombe owners you are well aware of the age of most of these boats that were built in the late 1960’s and onwards, and by now looking to have major upgrades and renovations carried out. With that in mind it’s a perfect opportunity to tackle these major upgrades in a supervised course environment. So, for Lugger owners who would like to bring their ‘Project Boat’, or owners who would like to be participating course members, I am now open for bookings.
As you will note from the attached images these major projects are best planned for the winter period, which leaves the final clean and adding of new accessories for springtime, ready for launching and another adventure.
My winter maintenance for the 9 Luggers which Dragon Drascombe operate is to keep all the joinery and fittings at a very high level of care. They spend their summers out on the water with clients in the harsh ‘Sea and Sun’, the worst of the 2 combinations. This pic 1 shows the side cockpit hatches that I made in 2019, and whilst I have diligently kept them oiled, there is a time they need to be taken off and brought back for a total refurb in the workshop. It’s evident that they look dry and without life.


This second picture show the transformation after cleaning back the surface with a spirit cleaner then re-oiling with many applications of Rustin’s Danish Oil. This is testament to the quality of the material and the manufacturing process back in 2019. They will now be refitted in early May when I get back to my boatyard base near Nidri.
And another winter task, cleaning and re-varnishing the JLJ-made Belay Pins.


Last November I took off two of the engine brackets and three buoyancy caps for a re-finish and re-oiling. So they now look as good as the day they were made back 5 years ago. I don’t have to tell Drascombe owners the benefits of purchasing a good quality piece of joinery or fittings, knowing that with good maintenance they will last a long time. That’s what I aim to do at Just Lugger Joinery&more!
Lugger Kelpie was the second project Lugger brought to the Practical Workshop Course by its owner Paul and his Dad. Paul has made great strides in his re-fitting of the boat back at home, and to add something very special he ordered a Lazarette floor and one on my tiller and extension units. Read the review of Kelpie’s major re-build work on the February course.
This is what Paul has said about his new tiller assembly:
Package was waiting for me when I got home on Friday evening, tiller handle is a thing of beauty!
For what it is, in my opinion one of the biggest upgrades one can make to the boat, for so little time to fully paint, finish and fit, and not costly, is the aft Lazarette flooring. It raises the area by 60 mm and produces a flat finish, and most of all it keeps bags and clothes dry. There is inevitably always a drop of water sloshing around in the shallow bilge. this certainly does the job. There is a Mk2 and Mk3 version, the difference being only the cut-out for the rudder casing, which differs between the two models.



The 2-part floor has an overlap, and the 60 mm block supplied sits under the overlap on the hull floor. All you need is a spot of waterproof adhesive to adhere it to the floor and then use the screw provided to fix both leaves down.
The overlap is created by resin bonding a cleat under the port side leaf and the starboard side leaf slots up to it nicely.
You will note from my past blogs and reviews that when I manufacture, or get manufactured, I always do it at scale. I have just collected this morning from Karen, my Seamstress near my home in Wales, 40 deck cushions and 10 Lugger Biminis with 4 of the longer Biminis for the Longboat / Cruiser models. By Saturday several of each product will be packed and dispatched to awaiting Drascombe owners.
The Biminis are well-tested by Dragon Drascombe out in the Ionian Sea where they are of the same importance as the outboard engine. Even in the UK / North Sea sailing areas, the latter for the Dutch contingent of Drascombe owners, they are good to have. I would not go out in a boat without one!
The cushions too. I recall the first time I sat in a Lugger, within an hour I was searching for something to sit on and to open out as a back rest against the Gunwale rail. Another vital part of the kit to have on board.
This spring when I leave the UK for the 6-day drive to the Ionian Sea, including 2 ferry crossings, my first stop and drop-off point will be near Lille in Belgium where I will meet up with Michel from Drascombe Nederland; he is my sole agent for JLJ in Europe. I’ll be stocking him up with joinery, spars and fittings ready for his busy summer of supplying and fitting these pieces at his base.
Also for when I get to my Nidri base I have had a request from 3 Longboat owners based on the island of Paxos, this is south of Corfu.
The first laid out on my bench is for Adam, he will get
- A Bimini (a very wise move I may say)
- 2 Deck Cushions (again I’m not sure how he’s managed without then up to now)
- One of my solid rudders
To complete the order will be one of our Swan Neck tiller and extension kits to fit his Davey& Co bronze tiller head.
Martin had a rudder made locally a couple of years ago, not galvanised so he will get a new rudder as a matter of urgency.
I have been in discussion with Orlando for some time about his very damaged and torn jib sail on the relative merits of a repair or replacing with a new sail and at the same time discarding his fixed jib forestay wire and foil and replacing with a new head sail with the forestay wire sewn into the forward edge of the sail. It’s so much easier to set the sail, to pull out by releasing the furling drum line and control the sail with the jib sheets.
So I have had the sail made by Dick at R&J Sails, and I’ve made up the jib halyard with a top sheave that connects to the mast head ring, and a swivel that connects onto the head of the rail. At its base and connected to the stem head fitting is a short spacer, then the furling drum. Job done and not difficult to assemble.
All 3 orders will be put on the daily ferry that stops in Lefkas Port each afternoon on its way to Corfu, Martin will intercept these packages when the ferry calls into Paxos en-route for Corfu.
I do hope you all have a safe and enjoyable summer of sailing in the UK. Or for those that have looked at the Dragon Drascombe website and find the sun, sea conditions and the Greek hospitality appealing, why not give it a go. Lugger sailing is great generally, however sailing out in the Greek Ionian Sea is so special.



